Specifications:
- Product name: Battery over-discharge protection module
- Model: XH-M609
- Power supply voltage: DC 6-60V
- Output voltage: DC 6-60V
- Control precision: 0.1v
- Power consumption: <1.5W
Settings:
Set below 12.5V to stop, above 14V to start:
Set the protection value: press “+” once to display the protection value, double-click “+”, the decimal point flashes, then press “+, -” to change the value to 12.5. If there is no operation for 3 seconds, the module will automatically save and exit the setting mode. Set the hysteresis value: press “-” once to display the hysteresis value, double-click “-“, and the decimal point flashes, at this time, press “+, -” to change the value to 1.5. If there is no operation for 3 seconds, the module will automatically save and exit the setting mode.
Set below 10V to stop, above 15.5V to start:
Set the protection value: press “+” once to display the protection value, double-click “+”, and the decimal point flashes, at this time, press “+, -” to change the value to 10.0. If there is no operation for 3 seconds, the module will automatically save and exit the setting mode. Set the hysteresis value: press “-” once to display the hysteresis value, double-click “-“, and the decimal point flashes, at this time, press “+, -” to change the value to 5.5. If there is no operation for 3 seconds, the module will automatically save and exit the setting mode.
Reset:
When the power is off, press and hold the two buttons at the same time, and then turn on the power. At this time, the screen displays “888”, indicating that the factory reset is successful.
Factory setting protection value: 12V, hysteresis value: 2V
